|
Post by frederick440scorp on Nov 15, 2018 19:41:48 GMT -5
Hey guys I'm brand new to this forum and I'm in search of a part that seems impossible to find, on the drive system for this tk it has what appears to be a type of metal bushing that inserts into the drive cog and then slides onto the main shaft. My dilema is that one of those steel bushing like pieces broke so the drive cog is just flopping around on the main shaft. If anyone has any leads it would be greatly appreciated.Thanks in advance!
|
|
|
Post by vintageracer123go on Nov 16, 2018 14:04:16 GMT -5
Im not quite sure what your looking for, but go to this link and this store might have just what your looking for. www.denniskirk.com/1980-scorpion-tk-440.mmy/1.pg . hope it helps. Im not to familiar with that sled so i cant help much other than to send you here, ive found parts for my 1971 scorpion stinger 2 on this store, so it might help you too.
|
|
80tkfan
L1 Scorpion - The Great Snowmobile
Posts: 5
|
Post by 80tkfan on Nov 16, 2018 15:59:24 GMT -5
If I understand your description the bushing should be part of the cog not a seprate part and they are held on to the drive shaft by a spring pin. Is the spring pin broke or gone?
|
|
|
Post by stinger440 on Dec 3, 2018 9:38:48 GMT -5
Best bet is to find a new cog and replace the whole thing.
|
|