80tkfan
L1 Scorpion - The Great Snowmobile
Posts: 5
|
Post by 80tkfan on Jul 13, 2018 14:01:10 GMT -5
First timer hear so be gentle. I have an 1980 tk I am cleaning up and in the belly pan there is an uneven crack in the side up above the ski post. It is about 4-5 long and goes right to the top of the pan of the any suggestions how to repair?
|
|
|
Post by oldscorpman on Jul 15, 2018 17:40:40 GMT -5
you will have to get your hands on a plastic welder and use the same type of plastic that the belly pan is made of. there is a old post on here somewhere that deals with the process.
|
|
80tkfan
L1 Scorpion - The Great Snowmobile
Posts: 5
|
Post by 80tkfan on Jul 16, 2018 13:45:00 GMT -5
Thanks for the reply I have a couple old belly pans to get some material from and we will see what happens.
|
|
|
Post by kube1 on Jul 17, 2018 10:31:48 GMT -5
I have had great success with a hot staple welder. When used from the inside of the pan the seam is darn near invisible from the outside. And it'll never break there again.
|
|