scorplover
L3 The Proven Snowmobile that never lets you down
Posts: 136
|
Post by scorplover on Feb 2, 2013 17:58:20 GMT -5
I have a rockwell with the Walbro carb on it. When cold with choke on and three primes starts right up first pull. Once hot if it sits a few minutes, it will not start, I have to wait until it cools downs again. I'm thinking bad seals?
|
|
crosscut
L2 Scorpion - Above All
Posts: 88
|
Post by crosscut on Feb 6, 2013 23:37:12 GMT -5
usually bad seals will make one cylinder cut in and out, especially at low rpms. Run the motor till it's at normal operating temp, and wait a few minutes, verify that it won't start and then check for spark. Sometimes when the ignition coils get old, they fail when they get heat soak, Give it a try and let us know what you find.
|
|
scorplover
L3 The Proven Snowmobile that never lets you down
Posts: 136
|
Post by scorplover on Feb 7, 2013 21:17:56 GMT -5
Will do thanks! Of course all the snow here in Ohio melted today. It may be awhile before I get to try that.
|
|