|
Post by oldscorpman on Oct 23, 2014 21:38:39 GMT -5
hey tom i know you rebuild these blind folded after every race, just wondering what gaskets and seals you recomend. engine has only 870 miles on it, 138 psi on both cylinders, leak test was good. figure i will do a reseal and timing set up and it should be ready.
thanks rick
|
|
|
Post by obj1 on Oct 24, 2014 10:32:44 GMT -5
Hey, Rick. We just use the windrosa set. Make sure to trim the carb insulator gaskets to fit nicely and i use a very thin coating of anaerobic sealer around them. Also check thickness of these insulator blocks and match up two of the same. Seems this area is where the leaks are mostly found when pressure testing. Call me any time. 715-248-7395
|
|
|
Post by oldscorpman on Oct 24, 2014 20:35:02 GMT -5
thanks tom, wish i would have started on this project earlier. wife wants to ride it this winter.
|
|