tonyfonz
L1 Scorpion - The Great Snowmobile
Posts: 6 
|
Post by tonyfonz on Nov 30, 2015 11:57:11 GMT -5
Looking for a drive axle for a 71 Super Stinger 793. This is a widetrack axle and has triple drivers. Also looking for the stock original gear ratio for this 71 Super 793. Also in need of a engine plate for this 793 Honker. Thanks. Call or text 715 680-0393. |
|
|
|
Post by pararailer on Dec 6, 2015 20:01:39 GMT -5
Drive shaft would be the same as a regular wide track. 71 or 72. You would just have to put an additional hole for the middle driver.
|
|
tonyfonz
L1 Scorpion - The Great Snowmobile
Posts: 6
|
Post by tonyfonz on Dec 7, 2015 11:56:59 GMT -5
Driveshaft is the same width, but the outside drivers on a triple drive track are set wider than a regular wide track with double drivers.
|
|
hoytskater
L1 Scorpion - The Great Snowmobile
Posts: 13
|
Post by hoytskater on Jan 15, 2016 22:10:52 GMT -5
Would a triple driver from a 72 super stinger 3 440 work?
|
|
|
|
Post by pararailer on Jan 16, 2016 22:23:13 GMT -5
72 Stinger III would just have two drivers. The length would be correct. Drill hole in the middle. Id think the out side drivers would be in the same positions.
|
|
tonyfonz
L1 Scorpion - The Great Snowmobile
Posts: 6
|
Post by tonyfonz on Jan 22, 2016 12:26:25 GMT -5
Hey Hoytskater. That triple driveshaft should work from a 72 Super Stinger 3 440. That's what I was told from Scorpion Jack. How much u want for it? And will u be goin to Waconia? Thanks.
|
|
