miker
L1 Scorpion - The Great Snowmobile
Posts: 5 
|
Post by miker on Oct 18, 2016 6:58:33 GMT -5
what cdi boxes are intercangeable with an 81 sting?
|
|
|
|
Post by stinger440 on Oct 18, 2016 7:14:10 GMT -5
As far as I know, there are no other CDI boxes that work. You just have to find a good stock box.
|
|
|
|
Post by 80sting440 on Oct 18, 2016 11:47:00 GMT -5
miker, here's where my replacement cdi was purchased for my engine.
Rodger at 618-584-3567. $100 shipped to USA
Read more: scorpionsleds.proboards.com/thread/1522/hello-winnipeg-manitoba?page=2#ixzz4NS7tOz2B
Unfortunately it does not allow use of the kill switch as is. It only has one available red/black stripe wire for on/off operation. The previous owner ran the wire to the ignition switch and had no use of the kill switch. I was able to modify the kill switch and am now able to use it. See picture. 
In between the two pins is a rivet. I soldered this rivet to the left side pin. This eliminates the throttle position switch (which often fails and I usually bypass it anyway).
Here's how I run the wiring. Red wire coming out of the engine goes to either wire of throttle block. The other wire out of throttle block connects to ignition switch. The other ignition switch wire goes to red/back stripe wire of new cdi box and as we say in French...voila!
Rene
|
|
