Post by schwarm on Mar 23, 2023 12:42:47 GMT -5
Ok here is the issue I am dealing with so according to the manual I checked and set the points to .016 #1 and #2 cylinder I took the head off #1 cylinder( for better accuracy) set up my dial indicator and zeroed out at TDC now I set the timing advance to fully advanced hooked up a light to the #1 coil wire(blue) connected to a battery the light lights up and it is dim I turned the flywheel ccw ad watched the dial as it reaches the .083-.102 BTDC once in this range the light never changes(stays dim) I keep turning ccw until the light gets bright(points closed) which is .145 BTDC! What am I doing wrong??? Can this be that far out of time? Please advise.