Post by prairieman on Jan 20, 2024 11:46:40 GMT -5
This is a Sachs starburst head, free air engine that has been professionally rebuilt, but never fired or installed in a chassis.
Model SA 2/440R
The displacement is 440cc (436cc to be precise).
This unit underwent a total rebuild in a professional shop.
- New PTO (clutch side) end bearing (correct wide bearing)
- All other bearings and rods were checked and passed specification
- Two new pistons & rings (these are L ring pistons)
- Original chrome bore cylinders passed specification (no peeling)
- .014 ring end gap spec on the four rings
- Point gap = 0.16
- Timing: MAG side = 0.152 and PTO side = 0.148
- Correct Tillotson HR 18A carbs, rebuilt with Tillotson components (no fuel ever in carbs)
- New plug wires and plug caps
- NOS magneto housing
- Engine bead blasted
AUCTION SITE: www.auctionmasters.com/auctions/detail/bw112788
HAVE QUESTIONS???
Send e-mail question to: oldsledandmemorabiliaauction@gmail.com
Model SA 2/440R
The displacement is 440cc (436cc to be precise).
This unit underwent a total rebuild in a professional shop.
- New PTO (clutch side) end bearing (correct wide bearing)
- All other bearings and rods were checked and passed specification
- Two new pistons & rings (these are L ring pistons)
- Original chrome bore cylinders passed specification (no peeling)
- .014 ring end gap spec on the four rings
- Point gap = 0.16
- Timing: MAG side = 0.152 and PTO side = 0.148
- Correct Tillotson HR 18A carbs, rebuilt with Tillotson components (no fuel ever in carbs)
- New plug wires and plug caps
- NOS magneto housing
- Engine bead blasted
AUCTION SITE: www.auctionmasters.com/auctions/detail/bw112788
HAVE QUESTIONS???
Send e-mail question to: oldsledandmemorabiliaauction@gmail.com
Attachments:
