|
|
Post by pararailer on Sept 18, 2013 6:57:59 GMT -5
is anyone familiar with john deere shafts and chaincases? was thinking about the possibility of putting a jackshaft and a better secondary in my scorp.
john deere used the same track in some models. Is there a J D site like this one?
|
|
|
|
Post by pararailer on Sept 18, 2013 7:27:36 GMT -5
Also, has anyone seen a mid engine mounted sled with a jackshaft? Im talking about a production sled. Could really throw alot of HP at a Jackshaft and good chaincase with good brake.
Did ski doo TNT's?
|
|
|
|
Post by stinger440 on Sept 18, 2013 9:38:43 GMT -5
JDSleds.com is the website you are looking for. I think the only difference in the driveshaft is JD is 1 1/8" vs the 1" scorpion shaft. I know the later JD parts fit in the later scorpion sleds not sure about fitting in the tunnel mount.
|
|
|
|
Post by pararailer on Sept 18, 2013 21:31:42 GMT -5
maybe a scorpion chaincase could be moved to the other side to hold the end of the jackshaft? It would be cool to use a modern secondary clutch. It would be adjustable and self aligning. hard part would be the brake.
|
|
|
|
Post by obj1 on Sept 18, 2013 22:29:59 GMT -5
Pararailer, haven't you looked at craig's range whip? cat secondary and Polaris chain case with a bike brake. 2 seconds at Princeton behind delaughter's 440 both classes.
|
|
|
|
Post by obj1 on Sept 18, 2013 22:32:44 GMT -5
The only thing off a john deere pararailer needs is a 3 point hitch to haul bubbanoz's trophys.
|
|
|
|
Post by pararailer on Sept 19, 2013 1:35:02 GMT -5
I have looked at that range whip, but Craigs sled is a front mounted engine.
that jackshaft sits right down low. different than a steel chassis.
bubbanozes trophys are a big haul!! need a tractor!!
|
|
|
|
Post by pararailer on Sept 19, 2013 1:38:31 GMT -5
I dont really want to use any cat or pol parts. What about a brut case? I want to keep it all vintage.
|
|
|
|
Post by stinger440 on Sept 19, 2013 7:09:07 GMT -5
The JD chaincase is very similar to a polaris case. This will be a tough project but it will be very cool when it comes together.
|
|
|
|
Post by obj1 on Sept 19, 2013 10:21:48 GMT -5
We are starting on a RETRO class sled. I have a real nice BRUT chassis/belly pan. Donated the suspension to the BRUT build last winter but will use a pararail anyway. The BRUT chassis looks like it will be great for a retro build.
|
|
|
|
Post by bubbanoz on Sept 24, 2013 17:11:35 GMT -5
I got no trophies.  |
|
