|
Post by weverat on Oct 18, 2013 18:57:36 GMT -5
I like to run 4" of carbide on my skis, but of course the Scorpions are no longer listed in the Parts unlimited, Marshal, or Fowler books.
In the past I used whatever I could find at the swap meet, cut, grind, weld to fit. I am old and lazy now, and just want a part number.
I need a set to fit the 1972 stinger. I am thinking there has to be something close to fitting, like an old cat or something. I noticed Parts Unlimited, and Fowler do list carbides for the 80, 81 TK's, but I am not sure if they are long enough.
Looking for a short cut
Thank You
|
|
|
Post by stinger440 on Oct 19, 2013 9:03:35 GMT -5
Do your skis have 1 bolt or 2 bolt? The single bolt runner for the 72 should be 27" long. The runner for the Tk's should be 32.5 so it would be long enough to work. The early 2 bolt runners should be 34" long.
|
|