|
Post by weverat on Oct 18, 2013 21:04:21 GMT -5
Does anybody know where I can get the Scorp drive sprockets for the 1972 Stingers (8 tooth, 2.52, 1" round shaft).
I am looking for the reproduction black colored sprockets, not the old stock white ones, pre cracked, and ready to break.
About 2 years ago I got some nice ones from Fowler, but no longer in stock.
How about Certified, do they have the good ones ?
Thank You
Steve 507-259-8536
|
|
|
Post by stinger440 on Oct 19, 2013 8:55:47 GMT -5
Check arctic cat parts. Lynx 77-80, panther 73-79, puma 73, cheetah 73-78 all used that sprocket. When I need them, I go to the salvage yard and get a cat drive axle to get the drivers off of.
|
|
|
Post by weverat on Oct 22, 2013 20:27:44 GMT -5
Thanx Stinger, I have noticed those drivers in the parts books, and often wondered if they fit our sled. They must be drilled to fit our roll pins to ? I will order a set, and check it out.
|
|
|
Post by stinger440 on Oct 22, 2013 21:12:14 GMT -5
No drilling required. They should already have the roll pin hole in them. Offset lines right up.
|
|