|
Post by wi77stingguy on Nov 12, 2017 9:29:23 GMT -5
Hello all first off my first carb a pj 36 mm was destroyed by a nest in my airbox!I found a pair of regular vm 38s to put in anyone have an idea on jetting to try? Also where can I get a manifold to carb boot this ones pretty bad too. Thanks for any help
|
|
|
Post by stinger440 on Nov 16, 2017 19:53:12 GMT -5
The carb boot is a standard mikuni flange you can get at any parts house. Do a forum search there is a lot of talk about carbs. Typically with a 38 swap, start with a 350 main, 35 pilot 2.5 cutaway 6DH3 or 4 in the middle clip position to start. Adjust as needed. Good luck. When its dialed in it will start and run great.
|
|
|
Post by wi77stingguy on Nov 18, 2017 18:08:49 GMT -5
Thanks for the reply I was out today I put a carb off a polaris a 38 I put 350 and 35 pilot in it it has no spark pto side im not worth a darn with points! I might sell it its got 2 engines some ducting robber duct etc I dont know if i want to mess with it.
|
|